Home Mail Us Sitemap
Equipment Sales Geological Processing Equipment
Core Stabilization
Core Handling and Processing Equipment
Geological Processing Equipment
Measurement of Fluid Saturations
Core Sample Cleaning Solutions
Grain Density (Porosity) and Permeability
Combined Porosimeter - Permeameter
Relative Permeability
Electrical Properties
Scal Support
Core Storage Solutions
Core Management Solutions
Turnkey Lab Setup
Consumables: One Stop Shop

Hot Solvent Sample Cleaning Soxhlets

Hot solvents boil in a round bottom flask. The clean solvent vapors rise and are condensed in the condenser. Warm solvent drips down in the sample chamber.

The samples are soaked in warm solvents till the chamber is full of solvent when it automatically drains down in the lower round bottom flask.

This ensures that the samples are soaked only in clean solvents at any point in time.

  • Borosilcate Glass, 3.5 liter Body Capacity, and 5 liter boiling flask
  • 150 mm diameter, 4 mm thick glass, flanged caps for ease of sample removal, for approx 20 1.5 inch dia and 3.5 inch long samples
  • Heating Mantle : Powder coated metal body, with 800 W individual heater
  • Concentric Double Condenser for greater cooling efficiency



Cool Solvent Sample Cleaning Soxhlets

Sensitive clays can be damaged if subjected to Hot Solvent cleaning and
drying in a conventional oven.

Such samples are required to be cleaned in Cool Cleaning Soxhlets and
subjected to drying in a Humidity Oven.

Difference in porosity measurements after drying with humidity oven and
then after drying with conventional oven will determine the porosity lost due to clay.

  • 5 lit flask, Borosilicate glass : 3.5 lit Body Capacity, 150 mm diameter, 3 mm thick glass
  • Heating Mantle : Powder coated metal body, 800 W Individual heater
  • Concentric Double Condenser for greater cooling efficiency




Vapour Extractor

Specially designed for heavy oils, the vapour extractor is an excellent equipment designed by ICS to provide gentle and quick cleaning of samples containing heavy oils.

The solvent boils at the bottom of the extractor and vapours of clean solvent pass through the sample causing dissolution of the heavy oil and thus cleaning the sample.

Sample Cleaning time is reduced by almost 70% thus reducing the turnaround time and costs for the end user





 
ICS Field Services ICS Lab Services   ICS Lab Services Equipment Sales
 
Personnel
Portable Spectral Core Gamma
Core Stabilization
Onsite Core Processing
Core Transportation
 
High Resolution CT Scanning
Core Processing
High Resolution Digital Imaging
Residual Saturations by Dean and Stark Method
Grain Density and Porosity
Steady State Gas Permeability
Specific Liquid Permeability
Residual Gas by Counter Current Imbibition
 
 
Amott Wettability
Electrical Analysis
Cation Exchange Capacity
USS Ambient Condition Relative Permeability
Pore Volume Compressibility
Return Permeability
Mineralogy
  ICS Team
Equipment Sales

ICS News & Updates
Conatct ICS